FUJIKURA MCH HYBRID SHAFTS
Combining carbon and metal, the latest technology shaft unique to Fujikura Shaft.
It is a shaft for hybrid which succeeded feeling of good balance of MCI, feeling. A steady directionality is added to the flight distance and hit feeling which is the merit of the carbon shaft, and it is possible to target the green strongly with a high sphere.
MCT (Metal Composite Technology)
The carbon shaft becomes the center of gravity of the hand compared with the steel shaft, and it influences the swing weight of the club. If you wind a lot of fibers at the tip to improve it, the rigidity will be high and there is a harmful effect of impairing feeling. With the development of "MCT", it became possible to balance both the adjustment of the position of the center of gravity of the shaft and the high controllability by "smooth motion" which is the feature of the carbon shaft.
SHAFT TIP TRIMMING
The following tip trimming instructions are suggestions only. We generally do not recommend tip trimming on a driver or 3 wood shafts based on the shaft composition and how tipping could affect performance. We recommend that you consult your custom fitter or club-builder for the best tip trimming suggestions based on your individual swing and desired results.
In general, tip trimming can be used to achieve a stiffer shaft profile, lower launch, and/or lower spin. Tip trimming 1" is equivalent to one flex. For example, if you wanted to stiffen your S flex to an X flex then you would tip trim 1". If you prefer to play shaft in between S and X flex, you would tip trim 1/2".