UNIVERSAL SHAFT EXTENDER (CORE .540" TO .480")
$3.35
The universal shaft extender is a time and cost saver on rush jobs as the extender is bound to fit most shafts. One size fits all, reduces the need to keep assorted extenders in stock. Saves time and hassle finding...
Add to Compare
A290100
Clubmaking Shafting Supplies
The universal shaft extender is a time and cost saver on rush jobs as the extender is bound to fit most shafts....
Title *
GRAPHITE SHAFT EXTENDER STANDARD (CORE .480")
$3.00
Grooves retain epoxy to ensure good wetting and a strong bond. The Extender can be thinned down to fit shaft butt as desired.These extenders for standard graphite shafts will lengthen virtually any golf club. Simply apply epoxy, slide the extender...
Add to Compare
A290110
Clubmaking Shafting Supplies
Grooves retain epoxy to ensure good wetting and a strong bond. The Extender can be thinned down to fit shaft butt as...
Title *
MR T UNIVERSAL FERRULE TOOL
$18.75
A small hand-tool designed for installing ferrules of any size. This tools features a comfortable moulded T-handle and a soft non marring ferrule seat. This arrangement works much better than hammering down a ferrule with an insertion tube! To install...
Add to Compare
A130700
Clubmaking Shafting Supplies
A small hand-tool designed for installing ferrules of any size. This tools features a comfortable moulded T-handle and a soft non marring...
Title *
BROKEN SHAFT TIP EXTRACTOR FOR WOODS AND IRONS (SET)
$72.80
Broken Shaft Tip Extractor for Steel Shafts Pulling out shafts that broke flush with the hosel is a time consuming job unless you have a set of specially designed set of threading taps that can cut through heat treated chrome...
Add to Compare
A190100
Clubmaking Shafting Supplies
Broken Shaft Tip Extractor for Steel Shafts Pulling out shafts that broke flush with the hosel is a time consuming job unless...
Title *
METAL REINFORCED RUBBER CLAMP
$13.75
Tough on the outside and gentle on the inside. This original design featuring the Golfmechanix 'Power Rib' has been emulated by many for its ability to constrict a shaft without crushing it when over tightening the vise. Performs better and...
Add to Compare
A170720
Clubmaking Shafting Supplies
Tough on the outside and gentle on the inside. This original design featuring the Golfmechanix 'Power Rib' has been emulated by many...
Title *
BUTT WEIGHTS
from $1.33
The weighted lead nail at the rear end of the shaft is used to reduce the weight of the swing or increase the playing feel of the putter. It is suitable for use with diameters of 14.73~15.24mm at the rear...
Add to Compare
A220510-08G
Clubmaking Misc Shafting Supplies
The weighted lead nail at the rear end of the shaft is used to reduce the weight of the swing or increase...
Weight *
MR. T GRAPHITE SHAFT TIP EXTRACTOR
$18.15
Graphite Shaft Tip Extractor is a handy little tool that saves a lot of time and frustration when dealing with broken shaft tips! Screws into the back of the broken shaft to extend it. The extension can then be clamped...
Add to Compare
A210310
Clubmaking Shafting Supplies
Graphite Shaft Tip Extractor is a handy little tool that saves a lot of time and frustration when dealing with broken shaft...
Title *
20 Inch Classic Blade Style Grip Remover
$50.65
Developed as a safe alternative over pressurized solvent grip shooters and compressed air, the Classic Blade Grip Remover allows club-makers to re-use rubber or composition grips when counter-weighing, butt trimming, extending, or swing weighing golf clubs. Made of cold rolled...
Add to Compare
A110800-20
Clubmaking Shafting Supplies
Developed as a safe alternative over pressurized solvent grip shooters and compressed air, the Classic Blade Grip Remover allows club-makers to re-use...
Title *
12 INCH CLASSIC BLADE STYLE GRIP REMOVER
$27.50
Developed as a safe alternative over pressurized solvent grip shooters and compressed air, the Classic Blade Grip Remover allows club-makers to re-use rubber or composition grips when counter-weighing, butt trimming, extending, or swing weighing golf clubs. Made of cold rolled...
Add to Compare
A110800-12
Clubmaking Shafting Supplies
Developed as a safe alternative over pressurized solvent grip shooters and compressed air, the Classic Blade Grip Remover allows club-makers to re-use...
Title *
Sold out
DOUBLE BEND PUTTER SHAFT ALIGNMENT JIG RH/LH
$70.65
Once the epoxy bond has hardened, the lie angle is measured using the gauge and adjusted to the desired specifications. Originally designed by Bill Totton master clubmaker and former instructor at the Golfsmith, the double bend putter shaft alignment tool...
Add to Compare
A140221
Clubmaking Shafting Supplies
Once the epoxy bond has hardened, the lie angle is measured using the gauge and adjusted to the desired specifications. Originally designed...
Title *
Sold out
A290140-SS56
Clubmaking Shafting Supplies
Butt *
PUTTER BENDING BAR
$50.00
This Putter Hosel Bending Bar is designed to gently leverage the hosel on nicely crafted putters. The right spacing between the Nylon sheaves with machined gutter support the hosel gently while providing sufficient clearance for the bar to clear the...
Add to Compare
A150833
Clubmaking Shafting Supplies
This Putter Hosel Bending Bar is designed to gently leverage the hosel on nicely crafted putters. The right spacing between the Nylon...
Title *
INDUSTRIAL GOLF CLUB CURING RACK ON WHEELS
$191.00
The Industrial Golf Club Curing rack on wheels is the ideal solution for carting clubs out of the way just after assembly to let the epoxy bond cure without disturbance. The cart accommodates up to 22 clubs of any type...
Add to Compare
A231125
Clubmaking Shafting Supplies
The Industrial Golf Club Curing rack on wheels is the ideal solution for carting clubs out of the way just after assembly...
Title *
HEAD TO SHAFT DRYING CLIP
$8.15
With the drying clips in place, ensure that shaft graphics are oriented as intended and that the ferrule is flush with the hosel. Minor adjustments of the shaft and head can be made with the drying clips in place. Remove...
Add to Compare
A140300
Clubmaking Shafting Supplies
With the drying clips in place, ensure that shaft graphics are oriented as intended and that the ferrule is flush with the...
Title *
GRIP AND SHAFT DIMENSIONING COMBINATION GAUGE
$47.25
Machined from heavy gauge aluminium and CNC engraved over a black anodized surface. This versatile gauge will measure grip size and butt end of shafts on both men's and ladies' clubs, including undersized, standard and oversized. Easily measures right-handed and...
Add to Compare
A060200
Clubmaking Shafting Supplies
Machined from heavy gauge aluminium and CNC engraved over a black anodized surface. This versatile gauge will measure grip size and butt...
Title *
GRIP INSTALLER
$15.95
GRIP INSTALLER
$15.95
Originally designed or the Taylormade bubble shaft, this big butt grip installer has become an essential re-gripping tool for replacing worn-out grips and installing new ones over large butt shafts. The installer stretches the grip mouth evenly and guides it...
Add to Compare
A110100
Clubmaking Shafting Supplies
Originally designed or the Taylormade bubble shaft, this big butt grip installer has become an essential re-gripping tool for replacing worn-out grips...
Title *

Showing: 1 - 16 of 18

Free domestic standard shipping within continental USA for all orders over $199
All Items Returnable if Not Satisfied!
Genuine Product Guarantee
Secure Shopping Guarantee
Cart cart 0
You have successfully subscribed!